Costar Video Systems CDC2040MO-1 Manuel d'instructions télécharger pdf (Page 26)

5.2.2.1.2 Set Preshot

Move the Dome camera to the desired position on all 3 axis

(P,T,Z) and then press IRIS CLOSE button to confirm the

preset position location and return to the previous menu.

The menu will display “Stored” confirming that the position

has been set in the dome memory. If you do not see the

confirmation repeat the process as there may be a latency of

communications depending the wiring method and the

number of devices connected on the RS485 Loop.

5.2.2.1.3 Call Preshot

Based on the displayed/selected preset position on line 1 of

this menu, the dome will respond upon moving the joystick

to the Right position and position itself to the corresponding

coordinates (X,Y, Z) of the selected preset position.

5.2.2.1.4 Delete Preshot

Caution: Are you sure you want to delete this preset?

Press IRIS OPEN button to confirm

Press IRIS CLOSE button to exit and return to the previous

menu level.

5.2.2.1.5 Name _ _ _ _ _ _ _ _

User can edit the name of a preset position. Move the

Joystick Left or Right to select desired character position and

press IRIS OPEN button to display the character selection sub

menu.

Move the joystick Left or Right to select desired character

(0~~9 or A~~Z). Press IRIS OPEN button to confirm selection

and move to the next character of choice.

Press IRIS CLOSE button to exit or return to the previous

menu level when programming is done.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Pas de commentaire

Costar Video Systems CDC2040MO-1 Manuel d'instructions Page 26